ELM327 kompatibelt Wireless WiFi bildiagnostikk verktøy
servicegjenopprettere og feilkodeleser for verksteder eller gjør-det-selv mekanikeren. Håndterer nesten alle merker, bl a Volvo og Saab, fungerer på alle biler som har OBD2-uttak (nesten alle biler 1996 og fremover). Produktet leveres uten programvare. Mengder av Freeware finner du på Scantool.net: http://scantool.imechatronics.com/downloads.htm
NB! Ikke noen support gis på dette produkt, all bruk av bildiagnostikkverktøy skjer på egen risiko...
På iPhone kan du bruke f.eks. - http://www.devtoaster.com/products/rev/ eller https://itunes.Apple.com/us/app/fuzzycar/id327822395?mt=8
Støtter alle OBD2 / OBDII / OBD-2 / OBD-II / EOBD protokoll. Bruk sammen med f.eks. Android telefon, datamaskin, iPhone eller iPad. Elm 327 har ikke noen ledning uten kun internettilkobling via wifi.
Kobles enkelt opp trådløst til din datamaskin eller smartphone.
For å kunne lese av informasjonen i din smartphone kreves programvare. Disse finnes tilgjengelig både for Android og iPhone via Apper.
ELM327 WIFI OBD diagnostic cable able to detect and interpret obd2 / eobd protocols automatically. It also provides support for high speed communications and a low power sleep mote. It use AT commands to communicate with a host device (PC, notebook, iPhone, iPod touch, iPad and so on). There are plenty of software packages available, which are fully compatible with this tool. Some of them have pretty useful features, such as engine running parameters monitoring, DTC reading and clearing, MPG meter, etc.. You can even write your own software on a specified hardware platform if you wish, because the AT commands are fully documented and very well explained. This tool is only 2.7 x 1.25x 0.9 inches, and it comes with a 6 ft OBDII cable for easy installation. It also includes a power switch built-in to prevent the need for having to constantly disconnect your unit from the OBDII port. It is compatible with 1996 and later vehicles which are obd2 or eobd compliant. Connecting to your iPhone / iPod touch is made by WIFI connection in adHoc mote.
With proper software installed in the host device, you may have following parameters read out from your vehicle: Vehicle Speed RPM Fuel Consumption Engine Coolant Temp Fuel Pressure Calculated Engine Load Throttle Position Intake Manifold Pressure Air Intake Temp Timing Advance Mass Air Flow Fuel Level Barometric Pressure EVAP System Vapor Pressure Fuel Trim
Protocoll: - ISO15765-4 (CAN) - ISO14230-4 (KWP2000) - ISO9141-2 Compatibelt with: - SAE J1850 PWM (41.6 kbaud) - SAE J1850 VPW (10.4 kbaud) - ISO 9141-2 (5 baud init, 10.4 kbaud) - ISO 14230-4 KWP (5 baud init, 10.4 kbaud) - ISO 14230-4 KWP (fast init, 10.4 kbaud) - ISO 15765-4 CAN (11 bit ID, 500 kbaud) - ISO 15765-4 CAN (29 bit ID, 500 kbaud) - ISO 15765-4 CAN (11 bit ID, 250 kbaud) - ISO 15765-4 CAN (29 bit ID, 250 kbaud)
Vehicle Coverage: Work with all obd2 or eobd cars.
Elm327 WIFI - iOS Easy Setup Guide, Dashcommand is recomended.
1- Wifi Settings Search wifi -- Connect to device (SSID: OBDDevice/CLKDevices) Static Tab -- IP Address: 192.168.0.123 -- Subnet Mask: 255.255.255.0
2- Software Settings Open Software (your iOS sofware (ex: Rev DashCommand, FuzzyCar )) Settings: Interface type : ELM -- Data Port : tcp://192.168.0.10:35000
3- Have Fun!
Free software: Scantool.net GM Mote 22 Scan Tool by Terry OBD Gauge for PalmOS and Pocket PC by Dana Peters OBD Logger by Jonathan Senkerik OBD-II ScanMaster by Wladimir Gurskij (ScanMaster 3.52 - local copy) obd2crazy.com OBD2 Scantool by Ivan Andrewjeski OBDII for ELM322 by David Huffman pyOBD by Donour Sizemore for MacOSX and Linux RDDTC by Pete Calinski Real Scan by Brent Harris ScanTest for Pocket PC by Ivan Ganev aka a-ser wOBD by WDT
servicegjenopprettere og feilkodeleser for verksteder eller gjør-det-selv mekanikeren. Håndterer nesten alle merker, bl a Volvo og Saab, fungerer på alle biler som har OBD2-uttak (nesten alle biler 1996 og fremover). Produktet leveres uten programvare. Mengder av Freeware finner du på Scantool.net: http://scantool.imechatronics.com/downloads.htm
NB! Ikke noen support gis på dette produkt, all bruk av bildiagnostikkverktøy skjer på egen risiko...
På iPhone kan du bruke f.eks. - http://www.devtoaster.com/products/rev/ eller https://itunes.Apple.com/us/app/fuzzycar/id327822395?mt=8
Støtter alle OBD2 / OBDII / OBD-2 / OBD-II / EOBD protokoll. Bruk sammen med f.eks. Android telefon, datamaskin, iPhone eller iPad. Elm 327 har ikke noen ledning uten kun internettilkobling via wifi.
Kobles enkelt opp trådløst til din datamaskin eller smartphone.
For å kunne lese av informasjonen i din smartphone kreves programvare. Disse finnes tilgjengelig både for Android og iPhone via Apper.
ELM327 WIFI OBD diagnostic cable able to detect and interpret obd2 / eobd protocols automatically. It also provides support for high speed communications and a low power sleep mote. It use AT commands to communicate with a host device (PC, notebook, iPhone, iPod touch, iPad and so on). There are plenty of software packages available, which are fully compatible with this tool. Some of them have pretty useful features, such as engine running parameters monitoring, DTC reading and clearing, MPG meter, etc.. You can even write your own software on a specified hardware platform if you wish, because the AT commands are fully documented and very well explained. This tool is only 2.7 x 1.25x 0.9 inches, and it comes with a 6 ft OBDII cable for easy installation. It also includes a power switch built-in to prevent the need for having to constantly disconnect your unit from the OBDII port. It is compatible with 1996 and later vehicles which are obd2 or eobd compliant. Connecting to your iPhone / iPod touch is made by WIFI connection in adHoc mote.
With proper software installed in the host device, you may have following parameters read out from your vehicle: Vehicle Speed RPM Fuel Consumption Engine Coolant Temp Fuel Pressure Calculated Engine Load Throttle Position Intake Manifold Pressure Air Intake Temp Timing Advance Mass Air Flow Fuel Level Barometric Pressure EVAP System Vapor Pressure Fuel Trim
Protocoll: - ISO15765-4 (CAN) - ISO14230-4 (KWP2000) - ISO9141-2 Compatibelt with: - SAE J1850 PWM (41.6 kbaud) - SAE J1850 VPW (10.4 kbaud) - ISO 9141-2 (5 baud init, 10.4 kbaud) - ISO 14230-4 KWP (5 baud init, 10.4 kbaud) - ISO 14230-4 KWP (fast init, 10.4 kbaud) - ISO 15765-4 CAN (11 bit ID, 500 kbaud) - ISO 15765-4 CAN (29 bit ID, 500 kbaud) - ISO 15765-4 CAN (11 bit ID, 250 kbaud) - ISO 15765-4 CAN (29 bit ID, 250 kbaud)
Vehicle Coverage: Work with all obd2 or eobd cars.
Elm327 WIFI - iOS Easy Setup Guide, Dashcommand is recomended.
1- Wifi Settings Search wifi -- Connect to device (SSID: OBDDevice/CLKDevices) Static Tab -- IP Address: 192.168.0.123 -- Subnet Mask: 255.255.255.0
2- Software Settings Open Software (your iOS sofware (ex: Rev DashCommand, FuzzyCar )) Settings: Interface type : ELM -- Data Port : tcp://192.168.0.10:35000
3- Have Fun!
Free software: Scantool.net GM Mote 22 Scan Tool by Terry OBD Gauge for PalmOS and Pocket PC by Dana Peters OBD Logger by Jonathan Senkerik OBD-II ScanMaster by Wladimir Gurskij (ScanMaster 3.52 - local copy) obd2crazy.com OBD2 Scantool by Ivan Andrewjeski OBDII for ELM322 by David Huffman pyOBD by Donour Sizemore for MacOSX and Linux RDDTC by Pete Calinski Real Scan by Brent Harris ScanTest for Pocket PC by Ivan Ganev aka a-ser wOBD by WDT
Article number: 36423
