Bildiagnostikkverktøy for alle vanlige biler
f eks audi, golf, passat, skoda, seat.
kompatibelt med KKL USB Ver 409.1
fra årsmodell 1996 med usb kontakt
Inbygd interface.
Perfekt for bilverksted eller for hjemmebruk.
finnes gratis program som kan lastets ned fra http://www.ross-tech.com/
7500 feilkoder innebygd på gratisprogrammet.
OBS! Ingen support gis på dette produktet, all bruk av bildiagnostikkverktøy skjer på eget ansvar...
Konkurrentene tar 2900kr for produktet
Du kan kjøre diagnose, finne feil, slette feilkoder
KKL Ver 409.1 VAG-USB VW/AUDI OBD II 2 interface kabel
This diagnostic cable is usable for ISO9141 and KWP2000 transmission protocol like used for example by:
- Volkswagen
- - Audi
- - Skoda
- - Seat
Reference Data
1.This cable can not work if your car uses a protocol/bussystem like VPW, PWM or CAN-bus.
2. Terminal K = Bus of communication
3. Terminal L = Ignition for waking up car computing system (ECU: Engine Control Unit)
4. Existed 3 different protocols with same OBD2 connector incl. ISO/KWP, VPW, PMW
5. This K/L Diagnostic interface & cables work on ISO/KWP (Key Word Protocol) launched after 1996 only
6. supported also ISO9141 protocol
7.The Cables may work with some versjons of the Carsoft, but carsoft used a lot of different interfaces during the different versjons and also had some custom interfaces.
8.Product running as virtual com-port, like many products it uses a USB to RS232 converter chip. But under special circumstances this can give some problems regarding timing especially on the handshake lines.
9.VAG-COM shareware download:
http://www.ross-tech.com/vag-com/download/ Applications of the VAG-COM:
http://www.ross-tech.com/vag-com/download/
Read & erase error kode, log data e.g., speed, gasoline-consume, engine-rotating (RPM: Rotation Per Minutes)
f eks audi, golf, passat, skoda, seat.
kompatibelt med KKL USB Ver 409.1
fra årsmodell 1996 med usb kontakt
Inbygd interface.
Perfekt for bilverksted eller for hjemmebruk.
finnes gratis program som kan lastets ned fra http://www.ross-tech.com/
7500 feilkoder innebygd på gratisprogrammet.
OBS! Ingen support gis på dette produktet, all bruk av bildiagnostikkverktøy skjer på eget ansvar...
Konkurrentene tar 2900kr for produktet
Du kan kjøre diagnose, finne feil, slette feilkoder
KKL Ver 409.1 VAG-USB VW/AUDI OBD II 2 interface kabel
This diagnostic cable is usable for ISO9141 and KWP2000 transmission protocol like used for example by:
- Volkswagen
- - Audi
- - Skoda
- - Seat
Reference Data
1.This cable can not work if your car uses a protocol/bussystem like VPW, PWM or CAN-bus.
2. Terminal K = Bus of communication
3. Terminal L = Ignition for waking up car computing system (ECU: Engine Control Unit)
4. Existed 3 different protocols with same OBD2 connector incl. ISO/KWP, VPW, PMW
5. This K/L Diagnostic interface & cables work on ISO/KWP (Key Word Protocol) launched after 1996 only
6. supported also ISO9141 protocol
7.The Cables may work with some versjons of the Carsoft, but carsoft used a lot of different interfaces during the different versjons and also had some custom interfaces.
8.Product running as virtual com-port, like many products it uses a USB to RS232 converter chip. But under special circumstances this can give some problems regarding timing especially on the handshake lines.
9.VAG-COM shareware download:
http://www.ross-tech.com/vag-com/download/ Applications of the VAG-COM:
http://www.ross-tech.com/vag-com/download/
Read & erase error kode, log data e.g., speed, gasoline-consume, engine-rotating (RPM: Rotation Per Minutes)
Article number: 10724