OP-COM Bildiagnostikk for Opel
Feilkodeleser for verksteder eller gjør-det-selv mekanikeren. Håndterer nesten alle merker, spesielt tilpasset for VAG 1551/1552 (VW,AUDI, SKODA,and SEAT) Kobles til datamaskinen via USB - se feilkoder i dataskjermen
NB! Ikke noen support gis på dette produkt, all bruk av bildiagnostikkverktøy skjer på egen risiko...
OP-COM - PC based Opel diagnostic
VERSJON?OPCOM 090714
Excepting for reading out and a clear fault code, displaying live data, performing output test, and supporting remote and key programming, the program also supports various control units such as Engine, Automatic Transmission, ABS, Airbag, Engine Cooling module, Instrument Cluster, Electronic Climate Control, and Body Control Unit, just to name a few examples.
Due to Opel uses many PIN in the OBD connector, the diagnostic interface works as a multiplexer, and select the appropriate PIN for communication.
PIN3, PIN7, PIN8, PIN12 = Serial Link (ISO9141, KW81, KW82, KWP2000)
Fault codes will be shown with all available information:
Full fault code text description
Full status information (Present, Not present, Intermittent)
Users can print out, save, or copy the fault codes to any other application. From the fault codes window, users can go directly to the measuring blocks window. The program will present users measuring block information on many other control modules; users can choose anything from the list on their own.
It is able to show 8 measuring block parameter simultaneously. The sample rate is depends mostly on the communication protocol. For example, the older system, like Omega-B X 25 DT Engine (ISO-9141-2)
is very slow, but the newer Multec, or Bosch units are faster (using KWP-2000), and the newest CAN based control units are very fast! Users can also run output tests on many controllers.
PIN6-PIN14
PIN3-PIN11
PIN1
HSCAN - Dual-wire, High Speed CAN-BUS, 500 kbps
MSCAN - Dual-wire, Medium Speed CAN-BUS, 95 kbps
SWCAN - Single-wire, Low Speed CAN-BUS, 33.3 kbps
Users will get a feedback on the state of the activated output. This will helps users with finding the failure. Components more easily. With OP-COM, you can learn keys to immobiliser, and remote keys to the sentral door locking.
You can also reset, and program the following immobiliser related items: ECM, BCM, IPC.
You will need the vehicle security code, which can be found on the CAR-PASS.
You can also reset, and program the Service interval reminder on Astra-G, Zafira, Corsa-C, Meriva
You can code SAB6, and SAB8 airbags with the software.
The diagnostic inteface is USB port based, so there will be NO COMPATIBILITY ISSUES, with serial to USB converters.
The speed of the communication over the USB-BUS is enough to handle the awesome speed of the High-Speed CAN-BUS systems, which is currently 500kbps. This is the main reason, why only the USB port based interface is available for CAN-BUS.
Compared to the TECH2, which is the dealers tool (with a 32 MB Card+CANdi interface), the price of OP-COM is quite affordable.
Accessories:
1. OP COM Interface
2. USB Cable
3. Software and Drivers CD
Feilkodeleser for verksteder eller gjør-det-selv mekanikeren. Håndterer nesten alle merker, spesielt tilpasset for VAG 1551/1552 (VW,AUDI, SKODA,and SEAT) Kobles til datamaskinen via USB - se feilkoder i dataskjermen
NB! Ikke noen support gis på dette produkt, all bruk av bildiagnostikkverktøy skjer på egen risiko...
OP-COM - PC based Opel diagnostic
VERSJON?OPCOM 090714
Excepting for reading out and a clear fault code, displaying live data, performing output test, and supporting remote and key programming, the program also supports various control units such as Engine, Automatic Transmission, ABS, Airbag, Engine Cooling module, Instrument Cluster, Electronic Climate Control, and Body Control Unit, just to name a few examples.
Due to Opel uses many PIN in the OBD connector, the diagnostic interface works as a multiplexer, and select the appropriate PIN for communication.
PIN3, PIN7, PIN8, PIN12 = Serial Link (ISO9141, KW81, KW82, KWP2000)
Fault codes will be shown with all available information:
Full fault code text description
Full status information (Present, Not present, Intermittent)
Users can print out, save, or copy the fault codes to any other application. From the fault codes window, users can go directly to the measuring blocks window. The program will present users measuring block information on many other control modules; users can choose anything from the list on their own.
It is able to show 8 measuring block parameter simultaneously. The sample rate is depends mostly on the communication protocol. For example, the older system, like Omega-B X 25 DT Engine (ISO-9141-2)
is very slow, but the newer Multec, or Bosch units are faster (using KWP-2000), and the newest CAN based control units are very fast! Users can also run output tests on many controllers.
PIN6-PIN14
PIN3-PIN11
PIN1
HSCAN - Dual-wire, High Speed CAN-BUS, 500 kbps
MSCAN - Dual-wire, Medium Speed CAN-BUS, 95 kbps
SWCAN - Single-wire, Low Speed CAN-BUS, 33.3 kbps
Users will get a feedback on the state of the activated output. This will helps users with finding the failure. Components more easily. With OP-COM, you can learn keys to immobiliser, and remote keys to the sentral door locking.
You can also reset, and program the following immobiliser related items: ECM, BCM, IPC.
You will need the vehicle security code, which can be found on the CAR-PASS.
You can also reset, and program the Service interval reminder on Astra-G, Zafira, Corsa-C, Meriva
You can code SAB6, and SAB8 airbags with the software.
The diagnostic inteface is USB port based, so there will be NO COMPATIBILITY ISSUES, with serial to USB converters.
The speed of the communication over the USB-BUS is enough to handle the awesome speed of the High-Speed CAN-BUS systems, which is currently 500kbps. This is the main reason, why only the USB port based interface is available for CAN-BUS.
Compared to the TECH2, which is the dealers tool (with a 32 MB Card+CANdi interface), the price of OP-COM is quite affordable.
Accessories:
1. OP COM Interface
2. USB Cable
3. Software and Drivers CD
Article number: 37096
